Danfoss Pipes and Fittings There are 4 products.

Danfoss Pipes and Fittings

Pipes Danfoss are 100% impermeable to air, heat-resistant and flexible. It consists of an aluminum tube which is coated inside and outside plastic layer. All layers are connected to each other with strong adhesive.

  • Metal pipe - FH 200m - Danfoss
    Out of stock

    Composite pipe - FH 200m - Danfoss

    Pipes Danfoss FH is 100% impermeable to air, heat-resistant, and flexible. It consists of an aluminum tube, which is coated inside and outside with a plastic layer. All layers are connected to each other with strong adhesive.  

    Pipes Danfoss FH is 100% impermeable to air, heat-resistant, and flexible. It consists...

    Pipes Danfoss FH is 100% impermeable to air, heat-resistant, and flexible. It consists of an aluminum tube, which is coated inside and outside with a plastic layer. All layers...

    850 AMD
    Reference: 088X0001
    Add to cart
    View
  • Compression fitting 20x2mm
    Available

    Compression fitting 20x2mm

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe Diameter - 20 x 2 mm.Connection - internal thread, G ¾.For RA-K, RA-KE, RA15 / 6T, RA-C-15, VHS, RLV-K, RLV-KD, RLV-KS.Included - fitting bearing sleeve, compression ring, washer and coupling nut.Country: Denmark.Manufacturer: Danfoss.

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe Diameter - 20 x 2...

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe Diameter - 20 x 2 mm.Connection - internal thread, G ¾.For RA-K, RA-KE, RA15 / 6T, RA-C-15, VHS, RLV-K, RLV-KD,...

    1 800 AMD
    Reference: 013G4190
    Add to cart
    View
  • Fitting for polymer pipes 16x2 mm
    Out of stock

    Fitting for polymer pipes 16x2 mm

    Sealing fittings are designed to connect Danfoss thermostatic valves and locking and connecting elements with heating system piping. They are used when using PEX-type polymer pipes in heating systems. The maximum heat carrier parameters (pressure and temperature) for polymer pipes are indicated by pipe manufacturers. However, when using sealing fittings, the parameters should not exceed 6 bar and 95 ° C. The seal fitting kit includes a support...

    Sealing fittings are designed to connect Danfoss thermostatic valves and locking and...

    Sealing fittings are designed to connect Danfoss thermostatic valves and locking and connecting elements with heating system piping. They are used when using PEX-type polymer...

    2 000 AMD
    Reference: 013G4156
    Add to cart
    View
  • Underfloor heating pipe - Danfoss Duo-flex PEXa - 16x2 mm
    Available

    Underfloor heating pipe - Danfoss Duo-flex PEXa - 16x2

    Pipe for underfloor heating.A number of layers: 5.All layers are connected to each other with strong glue.Maximum operating temperature: 95 °C.Material: PEX-A.Pipe diameter: 16 mm.Wall thickness: 2 mm.Working pressure: 6 bar.Length: 240 m.Manufacturer: Danfoss.

    Pipe for underfloor heating.A number of layers: 5.All layers are connected to each...

    Pipe for underfloor heating.A number of layers: 5.All layers are connected to each other with strong glue.Maximum operating temperature: 95 °C.Material: PEX-A.Pipe diameter: 16...

    300 AMD
    Reference: 088X0952
    Add to cart
    View