Hydronic underfloor heating There are 86 products.

Hydronic underfloor heating

Water heating floor provides a comfortable and optimal, from hygienic point of view, floor temperature the temperature gradient at the height of the premises. Danfoss Floor Heating effectively operates in the energy from the heat pump and solar collector, because the parameters of the coolant used for under-floor heating adequately characterize ...  More

  • A set of mounting brackets Danfoss
    Available

    A set of mounting brackets - Danfoss

    A set of mounting brackets Danfoss type FHF-MB (includes 2 brackets) for fastening the collector to the wall.Country: Denmark.Manufacturer: Danfoss.

    A set of mounting brackets Danfoss type FHF-MB (includes 2 brackets) for fastening the...

    A set of mounting brackets Danfoss type FHF-MB (includes 2 brackets) for fastening the collector to the wall.Country: Denmark.Manufacturer: Danfoss.

    4 000 AMD
    Reference: 088U0585
    Add to cart
    View
  • Application module - Danfoss Icon App
    Out of stock

    Application module - Danfoss Icon App

    The Danfoss Icon Wi-Fi application module is used to add Danfoss Icon Master Controller 24V control functionality via Wi-Fi and the application. Using this module, it is possible to remotely control the Danfoss Icon heating system through a mobile application. From a smartphone, you can activate one of the pre-installed programs - "Not at home", "Comfort" and "Day off", as well as adjust the schedule. Danfoss Icon will receive system...

    The Danfoss Icon Wi-Fi application module is used to add Danfoss Icon Master Controller...

    The Danfoss Icon Wi-Fi application module is used to add Danfoss Icon Master Controller 24V control functionality via Wi-Fi and the application. Using this module, it is...

    Under the order
    Reference: 088U1101
    Add to cart
    View
  • Automatic air vent Danfoss
    Available

    Automatic air vent Danfoss

    FHF-EA - automatic air purge valve with the end section of the manifold.Purpose: to bleed air from the system.Country: Denmark.Manufacturer: Danfoss.

    FHF-EA - automatic air purge valve with the end section of the manifold.Purpose: to...

    FHF-EA - automatic air purge valve with the end section of the manifold.Purpose: to bleed air from the system.Country: Denmark.Manufacturer: Danfoss.

    9 000 AMD
    Reference: 088U0785
    Add to cart
    View
  • Compact mixing unit FHM-C1 with energy-efficient pump - Grundfos UPM3 Auto L 15-70
    Available

    Compact mixing unit FHM-C1 with energy-efficient pump - Grundfos UPM3 Auto L 15-70

    Danfoss compact mixing units are used to control the flow rate and temperature of the coolant supplied to the hydraulic floor heating system. The design of the mixing unit allows you to mount it both on the left and on the right side of the distribution manifold. The supply and return pipelines are connected at the side at the bottom of the mixing unit. To regulate the temperature of the coolant supplied to the floor heating system, an...

    Danfoss compact mixing units are used to control the flow rate and temperature of the...

    Danfoss compact mixing units are used to control the flow rate and temperature of the coolant supplied to the hydraulic floor heating system. The design of the mixing unit...

    210 000 AMD
    Reference: 088U0094
    Add to cart
    View
  • Metal pipe - FH 200m - Danfoss
    Out of stock

    Composite pipe - FH 200m - Danfoss

    Pipes Danfoss FH is 100% impermeable to air, heat-resistant, and flexible. It consists of an aluminum tube, which is coated inside and outside with a plastic layer. All layers are connected to each other with strong adhesive.  

    Pipes Danfoss FH is 100% impermeable to air, heat-resistant, and flexible. It consists...

    Pipes Danfoss FH is 100% impermeable to air, heat-resistant, and flexible. It consists of an aluminum tube, which is coated inside and outside with a plastic layer. All layers...

    850 AMD
    Reference: 088X0001
    Add to cart
    View
  • Compression fitting 16x2mm
    Available

    Compression fitting 16x2mm

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe diameter - 16 x 2 mm.Connection - internal thread, G ¾.For RA-K, RA-KE, RA15 / 6T, RA-C-15, VHS, RLV-K, RLV-KD, RLV-KS.Included - fitting bearing sleeve, compression ring, washer and coupling nut.Country: Denmark.Manufacturer: Danfoss.

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe diameter - 16 x 2...

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe diameter - 16 x 2 mm.Connection - internal thread, G ¾.For RA-K, RA-KE, RA15 / 6T, RA-C-15, VHS, RLV-K, RLV-KD,...

    1 400 AMD
    Reference: 013G4186
    Add to cart
    View
  • Compression fitting 20x2mm
    Available

    Compression fitting 20x2mm

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe Diameter - 20 x 2 mm.Connection - internal thread, G ¾.For RA-K, RA-KE, RA15 / 6T, RA-C-15, VHS, RLV-K, RLV-KD, RLV-KS.Included - fitting bearing sleeve, compression ring, washer and coupling nut.Country: Denmark.Manufacturer: Danfoss.

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe Diameter - 20 x 2...

    Purpose - for metal pipes (Alupex); PN 6 bar, Tmax. = 95 ° C.Pipe Diameter - 20 x 2 mm.Connection - internal thread, G ¾.For RA-K, RA-KE, RA15 / 6T, RA-C-15, VHS, RLV-K, RLV-KD,...

    1 800 AMD
    Reference: 013G4190
    Add to cart
    View
  • 1" connection fittings kit - Danfoss FHF-C
    Out of stock

    Connection fittings kit 1'' - Danfoss FHF-C

    Connecting fittings are intended for installation in collectors of the FHF series.Can be used to connect FHF collectors to each other.FHF-C comes with 2 connecting fittings.Material: brass.Manufacturer: Danfoss.

    Connecting fittings are intended for installation in collectors of the FHF series.Can...

    Connecting fittings are intended for installation in collectors of the FHF series.Can be used to connect FHF collectors to each other.FHF-C comes with 2 connecting...

    4 000 AMD
    Reference: 088U0583
    Add to cart
    View
  • Danfoss Icon floor temperature sensor - for 24V and 230V
    Available

    Danfoss Icon floor temperature sensor - for 24V and 230V

    The floor temperature sensor Danfoss Icon ™, installed in the screed and connected to the programmable room thermostat Danfoss Icon ™ on 24V and 230V.The length of the wire is 3 meters.Resistance - 47.Protection class - IP 67.Manufacturer: Danfoss.

    The floor temperature sensor Danfoss Icon ™, installed in the screed and connected to...

    The floor temperature sensor Danfoss Icon ™, installed in the screed and connected to the programmable room thermostat Danfoss Icon ™ on 24V and 230V.The length of the wire is 3...

    5 000 AMD
    Reference: 088U1110
    Add to cart
    View
  • Distribution manifold with adjustment Danfoss Manifold 11+11
    Available

    Distribution manifold with adjustment - Manifold 11+11

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-11 distribution manifold (088U0511) is used in underfloor heating systems. It is distinguished by reliability and increased efficiency.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-11 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-11 distribution manifold (088U0511) is used in underfloor heating systems. It is distinguished by...

    119 000 AMD
    Reference: 088U0511
    Add to cart
    View
  • Manifold 3+3
    Available

    Distribution manifold with adjustment - Manifold 3+3

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. Distribution manifolds are supplied with Danfoss integrated valve inserts, which have the possibility of hydraulic pre-adjustment to facilitate the commissioning and start-up of the underfloor heating system.

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    34 000 AMD
    Reference: 088U0503
    Add to cart
    View
  • Danfoss Manifold 4+4
    Available

    Distribution manifold with adjustment - Manifold 4+4

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. Distribution manifolds are supplied with Danfoss integrated valve inserts, which have the possibility of hydraulic pre-adjustment to facilitate the commissioning and start-up of the underfloor heating system.

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    43 000 AMD
    Reference: 088U0504
    Add to cart
    View
  • Distribution manifold with adjustment Manifold 5+5
    Available

    Distribution manifold with adjustment - Manifold 5+5

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-5 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-5 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-5 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    51 000 AMD
    Reference: 088U0505
    Add to cart
    View
  • Manifold 6+6
    Available

    Distribution manifold with adjustment - Manifold 6+6

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-6 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-6 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-6 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    60 000 AMD
    Reference: 088U0506
    Add to cart
    View
  • Distribution manifold with adjustment Manifold 7+7
    Available

    Distribution manifold with adjustment - Manifold 7+7

    Danfoss FHF-7 Distribution Manifold is the heart of any heating system. It serves to distribute heat and deliver it throughout the house through warm floors or heating radiators. Then the underlying coolant is returned back to the collector, mixed with hot and again distributed throughout the house.

    Danfoss FHF-7 Distribution Manifold is the heart of any heating system. It serves to...

    Danfoss FHF-7 Distribution Manifold is the heart of any heating system. It serves to distribute heat and deliver it throughout the house through warm floors or heating...

    69 000 AMD
    Reference: 088U0507
    Add to cart
    View
  • Danfoss Manifold 8+8
    Available

    Distribution manifold with adjustment - Manifold 8+8

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-8 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-8 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-8 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    80 000 AMD
    Reference: 088U0508
    Add to cart
    View
  • Manifold 9+9
    Available

    Distribution manifold with adjustment - Manifold 9+9

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-9 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-9 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-9 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    89 000 AMD
    Reference: 088U0509
    Add to cart
    View
  • Distribution manifold without adjustment  - Manifold 3+3
    Available

    Distribution manifold without adjustment - Manifold 3+3

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. 

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    26 000 AMD
    Reference: 088U0613
    Add to cart
    View