Terminal blocks Viking 3 There are 29 products.

Terminal blocks Viking 3

Viking Terminals 3 are the basis of the wiring system. Thanks to an optimized size, ease of fixing to the mounting rail and universal end caps, a new series of terminals 3 Viking is very easy and convenient to install, connect and label.

  • Connecting terminal block 6х8 - Viking 3 - grey
    Out of stock

    Connecting terminal block 6х8 - Viking 3 - grey

    Are used to connect two flexible or rigid conductors are provided with two slots for mounting the comb has two rows of contacts with a pitch of 8 mm. For rods and 15 mm deep rails EN 60715 depth 7.5 and 15 mm.Gray - general purpose, blue - for the neutral conductor, orange - for continuous chains, red - for special purposes (for circuit protection, security, etc.), the green can be used for grounding in electrical insulation class II.

    Are used to connect two flexible or rigid conductors are provided with two slots for...

    Are used to connect two flexible or rigid conductors are provided with two slots for mounting the comb has two rows of contacts with a pitch of 8 mm. For rods and 15 mm deep...

    480 AMD
    Reference: 037162
    Add to cart
    View
  • Connecting terminal block 70х22 - Viking 3 - grey
    Out of stock

    Connecting terminal block 70х22 - Viking 3 - grey

    Are used to connect two flexible or rigid conductors are provided with two slots for mounting the comb has two rows of contacts with a pitch of 8 mm. For rods and 15 mm deep rails EN 60715 depth 7.5 and 15 mm.Gray - general purpose, blue - for the neutral conductor, orange - for continuous chains, red - for special purposes (for circuit protection, security, etc.), the green can be used for grounding in electrical insulation class II.

    Are used to connect two flexible or rigid conductors are provided with two slots for...

    Are used to connect two flexible or rigid conductors are provided with two slots for mounting the comb has two rows of contacts with a pitch of 8 mm. For rods and 15 mm deep...

    Under the order
    Reference: 037166
    Add to cart
    View
  • Торцевая крышка - Viking 3 - с шагом 5/6/8/10 мм
    Out of stock

    End cap - Viking 3 - with the step 5/6/8/10 mm

    End cap Viking 3.For screw terminals.With the step 5/6/8/10 mm.1 input / 1 output.Country: France.Manufacturer: Legrand.

    End cap Viking 3.For screw terminals.With the step 5/6/8/10 mm.1 input / 1...

    End cap Viking 3.For screw terminals.With the step 5/6/8/10 mm.1 input / 1 output.Country: France.Manufacturer: Legrand.

    170 AMD
    Reference: 037550
    Add to cart
    View
  • End cap Viking 3 - for screw terminal blocks disconnect for measurement
    Out of stock

    End cap Viking 3 - for screw terminal blocks disconnect for measurement

    Accessory for Viking 3 terminals.End cap.For two-tier screw terminals.Color: gray.Manufacturer: Legrand.

    Accessory for Viking 3 terminals.End cap.For two-tier screw terminals.Color:...

    Accessory for Viking 3 terminals.End cap.For two-tier screw terminals.Color: gray.Manufacturer: Legrand.

    580 AMD
    Reference: 037553
    Add to cart
    View
  • End cap Viking 3 -fr screw terminal blocks disconnect p6 and function blocks p5
    Available

    End cap Viking 3 -fr screw terminal blocks disconnect p6 and function blocks p5

    Viking 3 end cap.For screw terminals.With a pitch of 12 and 15 mm.1 input/1 output.Color: gray.Manufacturer: Legrand.

    Viking 3 end cap.For screw terminals.With a pitch of 12 and 15 mm.1 input/1...

    Viking 3 end cap.For screw terminals.With a pitch of 12 and 15 mm.1 input/1 output.Color: gray.Manufacturer: Legrand.

    260 AMD
    Reference: 037551
    Add to cart
    View
  • Clamp terminals - Viking 3 - 10 mm step
    Out of stock

    End stop for Viking 3 terminal blocks with automatic 10mm pitch

    For symmetrical rails depth of 7.5 (except for the rails to be attached to the boards) and 15 mm.To support the ground bus:- Brass tires- Copper bus 12h4 mm Clamp- Terminals IP 2X with a flat steel rail 12x2 mm- Copper bus 12h4 mm- Shielding tires 10x3 mmCountry: FranceManufacturer: Legrand

    For symmetrical rails depth of 7.5 (except for the rails to be attached to the boards)...

    For symmetrical rails depth of 7.5 (except for the rails to be attached to the boards) and 15 mm.To support the ground bus:- Brass tires- Copper bus 12h4 mm Clamp- Terminals IP...

    Under the order
    Reference: 037512
    Add to cart
    View
  • End stop for Viking3 terminal blocks with automatic 12mm pitch
    Available

    End stop for Viking 3 terminal blocks with automatic 12mm pitch

    For symmetrical rails 15 and a depth of 7.5 mm.After cutting the top partition can be marked.Marking via CAB 3.Country: France.Manufacturer: Legrand.

    For symmetrical rails 15 and a depth of 7.5 mm.After cutting the top partition can be...

    For symmetrical rails 15 and a depth of 7.5 mm.After cutting the top partition can be marked.Marking via CAB 3.Country: France.Manufacturer: Legrand.

    1 400 AMD
    Reference: 037513
    Add to cart
    View
  • End stop for Viking3 terminal blocks with automatic 6mm pitch
    Out of stock

    End stop for Viking 3 terminal blocks with automatic 6mm pitch

    Step 6 mm.Marking via CAB 3.Snapped onto the rail.Screwless mounting.For symmetrical rails 15 and a depth of 7.5 mm.Ability to set holders marking elements Cat. Number 0395 96.Used as an end cap for the screw terminals in 5, 6, 8 and 10 mm with 1 input / 1 output.Country: France.Manufacturer: Legrand.

    Step 6 mm.Marking via CAB 3.Snapped onto the rail.Screwless mounting.For symmetrical...

    Step 6 mm.Marking via CAB 3.Snapped onto the rail.Screwless mounting.For symmetrical rails 15 and a depth of 7.5 mm.Ability to set holders marking elements Cat. Number 0395...

    800 AMD
    Reference: 037510
    Add to cart
    View
  • End stop for Viking 3 terminal blocks with automatic 8mm pitch
    Out of stock

    End stop for Viking 3 terminal blocks with automatic 8mm pitch

    Step 8 mm.For symmetrical rails 15 and a depth of 7.5 mm.Ability to set the holders of marking elements.Marking via CAB 3.Country: France.Manufacturer: Legrand.

    Step 8 mm.For symmetrical rails 15 and a depth of 7.5 mm.Ability to set the holders of...

    Step 8 mm.For symmetrical rails 15 and a depth of 7.5 mm.Ability to set the holders of marking elements.Marking via CAB 3.Country: France.Manufacturer: Legrand.

    300 AMD
    Reference: 037511
    Add to cart
    View
  • Перегородка - Viking 3 - с шагом 12 и 15 мм
    Out of stock

    Separation - Viking 3 - with the step 12 and 15 mm

    Separation and isolation barrier 3 Viking.For screw terminals.With the step 12 and 15 mm.1 input / 1 output.Country: France.Manufacturer: Legrand.

    Separation and isolation barrier 3 Viking.For screw terminals.With the step 12 and 15...

    Separation and isolation barrier 3 Viking.For screw terminals.With the step 12 and 15 mm.1 input / 1 output.Country: France.Manufacturer: Legrand.

    400 AMD
    Reference: 037561
    Add to cart
    View
  • Перегородка - Viking 3 - с шагом 5,6,8,10 мм
    Out of stock

    Separation - Viking 3 - with the step 5,6,8,10 mm

    Separation and isolation barrier 3 Viking.For screw terminals.With the step 5,6,8 and 10 mm.1 input / 1 output.Country: France.Manufacturer: Legrand.

    Separation and isolation barrier 3 Viking.For screw terminals.With the step 5,6,8 and...

    Separation and isolation barrier 3 Viking.For screw terminals.With the step 5,6,8 and 10 mm.1 input / 1 output.Country: France.Manufacturer: Legrand.

    350 AMD
    Reference: 037560
    Add to cart
    View