Heating system There are 272 products.

Heating system

Heating system is a series of technical elements for production, transportation and transmission to all heated rooms with the amount of heat required to maintain the temperature at a predetermined level. The main structural elements of the heating system: heat source, heat pipes, heaters.

  • Control key - A390 - Danfoss
    Out of stock

    Control key - A390 - Danfoss

    Управление температурой с функцией погодной компенсации в трех контурах отопления/охлаждения. Компенсация температуры помещения и ограничение температуры в обратном трубопроводе. Независимая или параллельная работа контуров. Контроль температуры в контуре ГВС. Ограничение температуры в обратном трубопроводе. Возможность приоритета ГВС. Аварийная сигнализация применительно к температуре потока и дополнительному вводу сигнала тревоги....

    Управление температурой с функцией погодной компенсации в трех контурах...

    Управление температурой с функцией погодной компенсации в трех контурах отопления/охлаждения. Компенсация температуры помещения и ограничение температуры в обратном...

    Under the order
    Reference: 087H3815
    Add to cart
    View
  • Differential pressure controller-valve - AVPQ DN 20
    Out of stock

    Differential pressure controller-valve - AVPQ DN 20

    Automatic flow and differential pressure controllers are primarily used in district heating systems. The controller closes when the pressure differential exceeds max. set flow rate. Controls consist of an adjustable throttle valve to adjust the flow rate of the two diaphragms and handle for adjusting the pressure differential.

    Automatic flow and differential pressure controllers are primarily used in district...

    Automatic flow and differential pressure controllers are primarily used in district heating systems. The controller closes when the pressure differential exceeds max. set flow...

    Under the order
    Reference: 003H6480
    Add to cart
    View
  • AFP DN 15-125
    Out of stock

    Differential pressure regulator - AFP DN 15-125

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений регулятор закрывается. Регулятор состоит из: - регулирующего фланцевого клапана типа VFG 2 / VFG 21,- регулирующего элемента типа AFP/AFP-9 с диафрагмой и пружиной для настройки перепада давлений.

    AFP является автоматическим регулятором перепада давлений, который прежде всего...

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений...

    Under the order
    Reference: 003G1016
    Add to cart
    View
  • AFP DN 15-125
    Out of stock

    Differential pressure regulator - AFP DN 15-125

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений регулятор закрывается. Регулятор состоит из: - регулирующего фланцевого клапана типа VFG 2 / VFG 21,- регулирующего элемента типа AFP/AFP-9 с диафрагмой и пружиной для настройки перепада давлений.

    AFP является автоматическим регулятором перепада давлений, который прежде всего...

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений...

    Under the order
    Reference: 003G1017
    Add to cart
    View
  • Differential pressure regulator AFP DN 15-250
    Out of stock

    Differential pressure regulator - AFP DN 15-250

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений регулятор закрывается. Регулятор состоит из: - регулирующего фланцевого клапана типа VFG 2 / VFG 21,- регулирующего элемента типа AFP/AFP-9 с диафрагмой и пружиной для настройки перепада давлений.

    AFP является автоматическим регулятором перепада давлений, который прежде всего...

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений...

    Under the order
    Reference: 003G1018
    Add to cart
    View
  • Differential pressure regulator AFP-9 DN 15-125 Danfoss
    Out of stock

    Differential pressure regulator - AFP-9 DN 15-125

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений регулятор закрывается. Регулятор состоит из: - регулирующего фланцевого клапана типа VFG 2 / VFG 21,- регулирующего элемента типа AFP/AFP-9 с диафрагмой и пружиной для настройки перепада давлений.

    AFP является автоматическим регулятором перепада давлений, который прежде всего...

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений...

    Under the order
    Reference: 003G1015
    Add to cart
    View
  • Differential pressure regulator AFP-9 DN 15-125
    Out of stock

    Differential pressure regulator - AFP-9 DN 15-125

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений регулятор закрывается. Регулятор состоит из: - регулирующего фланцевого клапана типа VFG 2 / VFG 21,- регулирующего элемента типа AFP/AFP-9 с диафрагмой и пружиной для настройки перепада давлений.

    AFP является автоматическим регулятором перепада давлений, который прежде всего...

    AFP является автоматическим регулятором перепада давлений, который прежде всего используется в системах централизованного теплоснабжения. При повышении перепада давлений...

    Under the order
    Reference: 003G1014
    Add to cart
    View
  • Electric drive - AMB 162, 230V
    Out of stock

    Electric drive - AMB 162, 230V

    AMB 162/182 drives are used to control the 3-and 4-way rotary valves such as HRE, HFE and HRB in district heating systems to control the temperature of the coolant.

    AMB 162/182 drives are used to control the 3-and 4-way rotary valves such as HRE, HFE...

    AMB 162/182 drives are used to control the 3-and 4-way rotary valves such as HRE, HFE and HRB in district heating systems to control the temperature of the coolant.

    Under the order
    Reference: 082H0011
    Add to cart
    View
  • Electric drive - AMB 162, 24V
    Out of stock

    Electric drive - AMB 162, 24V

    AMB 162/182 drives are used to control the 3-and 4-way rotary valves such as HRE, HFE and HRB in district heating systems to control the temperature of the coolant.

    AMB 162/182 drives are used to control the 3-and 4-way rotary valves such as HRE, HFE...

    AMB 162/182 drives are used to control the 3-and 4-way rotary valves such as HRE, HFE and HRB in district heating systems to control the temperature of the coolant.

    Under the order
    Reference: 082H0016
    Add to cart
    View
  • Electric drive - AME 435, 24V
    Out of stock

    Electric drive - AME 435, 24V

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control. The built-in electric limit switches to prevent overload of the motor and valve actuator.

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control....

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control. The built-in electric limit switches to prevent overload of the motor and valve actuator.

    Under the order
    Reference: 082H0161
    Add to cart
    View
  • Electric drive - AMV 435, 230V
    Available

    Electric drive - AMV 435, 230V

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control. The built-in electric limit switches to prevent overload of the motor and valve actuator.

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control....

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control. The built-in electric limit switches to prevent overload of the motor and valve actuator.

    140 000 AMD
    Reference: 082H0163
    Add to cart
    View
  • Electric drive - AMV 435, 24V
    Out of stock

    Electric drive - AMV 435, 24V

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control. The built-in electric limit switches to prevent overload of the motor and valve actuator.

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control....

    The actuator AMV 435 with a 3-point control and AME 435 actuator with analog control. The built-in electric limit switches to prevent overload of the motor and valve actuator.

    Under the order
    Reference: 082H0162
    Add to cart
    View
  • ECL Comfort 210 Danfoss
    Available

    Electronic temperature control - ECL Comfort 210

    ECL Comfort 210 - are electronic controllers for weather-compensated temperature control in district heating systems, heating and cooling, which can control up to 3 circuits simultaneously.Using a special key in the ECL The ECL Comfort 210 is to be loaded for the appropriate program in the selected application.

    ECL Comfort 210 - are electronic controllers for weather-compensated temperature...

    ECL Comfort 210 - are electronic controllers for weather-compensated temperature control in district heating systems, heating and cooling, which can control up to 3 circuits...

    180 000 AMD
    Reference: 087H3020
    Add to cart
    View
  • ECL Comfort 310
    Out of stock

    Electronic temperature control - ECL Comfort 310

    ECL Comfort 310 electronic controller with weather compensation of the flow temperature, which is used in district heating and cooling systems .The controller is equipped with the keys ECL application depending on the system heat or refrigeration. It supports up to 4 systems. The controller has outputs for Ethernet and Modbus communication and scheduling.

    ECL Comfort 310 electronic controller with weather compensation of the flow...

    ECL Comfort 310 electronic controller with weather compensation of the flow temperature, which is used in district heating and cooling systems .The controller is equipped with...

    Under the order
    Reference: 087H3040
    Add to cart
    View
  • Heat exchanger - XB 06H-1 16
    Out of stock

    Heat exchanger - XB 06H-1 16

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems installations for ventilation and air conditioning. The advantage of the heat exchanger is a combination of excellent thermal properties with the reliability of the design.

    Brazed plate heat exchanger with stainless steel plates are specially designed for...

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems...

    Under the order
    Reference: 004B2038
    Add to cart
    View
  • Heat exchanger - XB 06H-1 20
    Out of stock

    Heat exchanger - XB 06H-1 20

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems installations for ventilation and air conditioning. The advantage of the heat exchanger is a combination of excellent thermal properties with the reliability of the design.

    Brazed plate heat exchanger with stainless steel plates are specially designed for...

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems...

    Under the order
    Reference: 004B2039
    Add to cart
    View
  • Heat exchanger - XB 06H-1 30 Danfoss
    Out of stock

    Heat exchanger - XB 06H-1 30

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems installations for ventilation and air conditioning. The advantage of the heat exchanger is a combination of excellent thermal properties with the reliability of the design.

    Brazed plate heat exchanger with stainless steel plates are specially designed for...

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems...

    Under the order
    Reference: 004B2042
    Add to cart
    View
  • Heat exchanger - XB 06H-1 36
    Out of stock

    Heat exchanger - XB 06H-1 36

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems installations for ventilation and air conditioning. The advantage of the heat exchanger is a combination of excellent thermal properties with the reliability of the design. 

    Brazed plate heat exchanger with stainless steel plates are specially designed for...

    Brazed plate heat exchanger with stainless steel plates are specially designed for district heating systems. They can also be used for heating, hot water and cooling systems...

    Under the order
    Reference: 004B2043
    Add to cart
    View