Water Heating There are 345 products.

  • Danfoss Icon floor temperature sensor - for 24V and 230V
    Available

    Danfoss Icon floor temperature sensor - for 24V and 230V

    The floor temperature sensor Danfoss Icon ™, installed in the screed and connected to the programmable room thermostat Danfoss Icon ™ on 24V and 230V.The length of the wire is 3 meters.Resistance - 47.Protection class - IP 67.Manufacturer: Danfoss.

    The floor temperature sensor Danfoss Icon ™, installed in the screed and connected to...

    The floor temperature sensor Danfoss Icon ™, installed in the screed and connected to the programmable room thermostat Danfoss Icon ™ on 24V and 230V.The length of the wire is 3...

    5 000 AMD
    Reference: 088U1110
    Add to cart
    View
  • DHW heat exchanger for City 28 CSI - Beretta
    Out of stock

    DHW heat exchanger for City 28 CSI - Beretta

    The DHW heat exchanger is designed to heat water in a Beretta City 28 boiler.It is a water-to-water plate heat exchanger made of stainless steel plates, the plates are soldered together.The plates are the same size but rotated 180 degrees relative to each.This arrangement of plates provides an alternation of hot and cold flows.Water flows during heat exchange move towards each other and hot liquid transfers heat through the wall of the...

    The DHW heat exchanger is designed to heat water in a Beretta City 28 boiler.It is a...

    The DHW heat exchanger is designed to heat water in a Beretta City 28 boiler.It is a water-to-water plate heat exchanger made of stainless steel plates, the plates are soldered...

    24 000 AMD
    Reference: R8037.
    Add to cart
    View
  • DHW heat exchanger for Exclusive 35 and City 35 CSI - Beretta
    Out of stock

    DHW heat exchanger for Exclusive 35 and City 35 CSI - Beretta

    The DHW heat exchanger is designed to heat water in Exclusive 35 and City 35 CSI boilers.Heat transfer from gas combustion products to the coolant.When working in DHW mode, heat from the combustion products is transferred to the coolant, and then to the water in the DHW circuit.Sealing gaskets for attaching the heat exchanger are supplied with the heat exchanger.

    The DHW heat exchanger is designed to heat water in Exclusive 35 and City 35 CSI...

    The DHW heat exchanger is designed to heat water in Exclusive 35 and City 35 CSI boilers.Heat transfer from gas combustion products to the coolant.When working in DHW mode, heat...

    29 000 AMD
    Reference: R10024627.
    Add to cart
    View
  • DHW heat exchanger for Start 24 KIS - Riello
    Out of stock

    DHW heat exchanger for Start 24 KIS - Riello

    The DHW heat exchanger is designed for the Riello Start 24 kW boiler.It is a water-to-water plate heat exchanger made of stainless steel plates, the plates are brazed together.Manufacturer: Riello.

    The DHW heat exchanger is designed for the Riello Start 24 kW boiler.It is a...

    The DHW heat exchanger is designed for the Riello Start 24 kW boiler.It is a water-to-water plate heat exchanger made of stainless steel plates, the plates are brazed...

    32 000 AMD
    Reference: 4364200.
    Add to cart
    View
  • DHW heat exchanger for Start 35 KIS - Riello
    Out of stock

    DHW heat exchanger for Start 35 KIS - Riello

    The DHW heat exchanger is designed for the Riello Start 35 kW boiler.It is a water-to-water plate heat exchanger made of stainless steel plates, the plates are brazed together.Manufacturer: Riello.

    The DHW heat exchanger is designed for the Riello Start 35 kW boiler.It is a...

    The DHW heat exchanger is designed for the Riello Start 35 kW boiler.It is a water-to-water plate heat exchanger made of stainless steel plates, the plates are brazed...

    52 000 AMD
    Reference: 4365587.
    Add to cart
    View
  • Distribution manifold with adjustment Danfoss Manifold 11+11
    Available

    Distribution manifold with adjustment - Manifold 11+11

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-11 distribution manifold (088U0511) is used in underfloor heating systems. It is distinguished by reliability and increased efficiency.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-11 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-11 distribution manifold (088U0511) is used in underfloor heating systems. It is distinguished by...

    119 000 AMD
    Reference: 088U0511
    Add to cart
    View
  • Manifold 3+3
    Available

    Distribution manifold with adjustment - Manifold 3+3

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. Distribution manifolds are supplied with Danfoss integrated valve inserts, which have the possibility of hydraulic pre-adjustment to facilitate the commissioning and start-up of the underfloor heating system.

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    34 000 AMD
    Reference: 088U0503
    Add to cart
    View
  • Danfoss Manifold 4+4
    Available

    Distribution manifold with adjustment - Manifold 4+4

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. Distribution manifolds are supplied with Danfoss integrated valve inserts, which have the possibility of hydraulic pre-adjustment to facilitate the commissioning and start-up of the underfloor heating system.

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    43 000 AMD
    Reference: 088U0504
    Add to cart
    View
  • Distribution manifold with adjustment Manifold 5+5
    Available

    Distribution manifold with adjustment - Manifold 5+5

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-5 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-5 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-5 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    51 000 AMD
    Reference: 088U0505
    Add to cart
    View
  • Manifold 6+6
    Available

    Distribution manifold with adjustment - Manifold 6+6

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-6 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-6 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-6 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    60 000 AMD
    Reference: 088U0506
    Add to cart
    View
  • Distribution manifold with adjustment Manifold 7+7
    Available

    Distribution manifold with adjustment - Manifold 7+7

    Danfoss FHF-7 Distribution Manifold is the heart of any heating system. It serves to distribute heat and deliver it throughout the house through warm floors or heating radiators. Then the underlying coolant is returned back to the collector, mixed with hot and again distributed throughout the house.

    Danfoss FHF-7 Distribution Manifold is the heart of any heating system. It serves to...

    Danfoss FHF-7 Distribution Manifold is the heart of any heating system. It serves to distribute heat and deliver it throughout the house through warm floors or heating...

    69 000 AMD
    Reference: 088U0507
    Add to cart
    View
  • Danfoss Manifold 8+8
    Available

    Distribution manifold with adjustment - Manifold 8+8

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-8 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-8 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-8 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    80 000 AMD
    Reference: 088U0508
    Add to cart
    View
  • Manifold 9+9
    Available

    Distribution manifold with adjustment - Manifold 9+9

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-9 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-9 distribution...

    Working temperature: 90 ° C. Working pressure: 6 bar. The Danfoss FHF-9 distribution manifold with the adjustment is used in hydraulic underfloor heating systems.

    89 000 AMD
    Reference: 088U0509
    Add to cart
    View
  • Distribution manifold without adjustment  - Manifold 3+3
    Available

    Distribution manifold without adjustment - Manifold 3+3

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. 

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    26 000 AMD
    Reference: 088U0613
    Add to cart
    View
  • Distribution manifold without adjustment Manifold 5+5
    Available

    Distribution manifold without adjustment - Manifold 5+5

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. 

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    46 000 AMD
    Reference: 088U0615
    Add to cart
    View
  • Distribution manifold without adjustment - Manifold 6+6
    Available

    Distribution manifold without adjustment - Manifold 6+6

    Danfoss collectors are used to controlling heat transfer in hydraulic underfloor heating systems. Equipped with pre-set valves for balancing the underfloor heating circuits. TWA-A thermoelectric valves can be installed on the valves.

    Danfoss collectors are used to controlling heat transfer in hydraulic underfloor...

    Danfoss collectors are used to controlling heat transfer in hydraulic underfloor heating systems. Equipped with pre-set valves for balancing the underfloor heating circuits....

    58 000 AMD
    Reference: 088U0616
    Add to cart
    View
  • Distribution manifold without adjustment - Manifold 7+7
    Available

    Distribution manifold without adjustment - Manifold 7+7

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from 2 to 12. 

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating...

    Danfoss distribution manifolds are designed for use in hydraulic underfloor heating systems. The supply and return manifolds have a 1” connection, the number of outputs are from...

    67 000 AMD
    Reference: 088U0617
    Add to cart
    View
  • Distribution manifold without adjustment - Manifold 8+8
    Available

    Distribution manifold without adjustment - Manifold 8+8

    Danfoss collectors are used to controlling heat transfer in hydraulic underfloor heating systems. Equipped with pre-set valves for balancing the underfloor heating circuits. TWA-A thermoelectric valves can be installed on the valves.

    Danfoss collectors are used to controlling heat transfer in hydraulic underfloor...

    Danfoss collectors are used to controlling heat transfer in hydraulic underfloor heating systems. Equipped with pre-set valves for balancing the underfloor heating circuits....

    73 000 AMD
    Reference: 088U0618
    Add to cart
    View